CITOCLYN Flexographic printing cleaning agent

CITOCLYN Uni Eco is a fast acting washing product for manual and automatic printing plate cleaning, machine cleaning as well as parts cleaning systems. CITOCLYN Uni Eco is suitable for daily cleaning of anilox rollers and printing plates in flexographic printing machines. The grids are kept clean to ensure a uniform ink density is achieved.

• Not subject to mandatory hazard labelling under CLP
• Low foam formation
• Residue-free cleaning
• No sticking of the printing blocks after cleaning
• Can be used in heated roller washing systems
• Recommended dilution with water 1:5 up to 1:10
• Maximum temperature for automatic washing systems 50° C

• Not subject to mandatory hazard labelling under CLP
• Mildly alkaline (pH 8 – 9)
• Low foam formation
• Large cleaning effect
• Printing plate-friendly
• Completely water-soluble
• Residue-free cleaning
• Removes calcium deposits
• VOC-free
• AOX-free
• Water hazard class 1

CITOCLYN Uni is specially defoamed and is therefore also optimally suited for use in ultrasound cleaning systems. The flexographic printing cleaner is universally usable.

• Specially defoamed
• Can be used in heated roller washing systems
• Residue-free drying
• Recommended dilution with water 1:5 up to 1:10
• Maximum temperature for automatic washing systems 50° C

• Mildly alkaline (pH 8 – 9)
• Low foam formation
• High cleaning effect
• Printing plate-friendly
• Completely water-soluble
• Residue-free cleaning
• Removes calcium deposits
• VOC-free
• AOX-free
• Water hazard class 1

CITOCLYN Man is a flexographic printing cleaner for removing dried-on printing ink from printing plates or anilox rollers by manual cleaning outside the printing machine.

• Residue-free drying
• Pure or diluted with water up to 1:10
• Maximum temperature for automatic washing systems 50° C

• Highly alkaline (pH 13 – 14)
• Fast cleaning effect
• Large cleaning capacity
• Printing plate-friendly
• Completely water-soluble
• Residue-free cleaning
• VOC: × < 0.25 %
• AOX-free
• Water hazard class 1

CITOCLYN Anilox is an excellent washing agent for manual or automatic cleaning in external cleaning systems for anilox rollers.

• Outstandingly deep cleaning
• Low foam formation
• Can be used in heated roller washing systems
• Residue-free drying
• For manual cleaning pure or diluted with water up to 1:2
• Depending on the degree of soiling, leave to act for several minutes and then rinse off with clean water.
• For automatic cleaning diluted with water up to 1:5
• Maximum temperature for automatic washing system 40° C

• Highly alkaline (pH 13 – 14)
• Fast cleaning effect
• Outstandingly deep cleaning
• Maximum cleaning effect
• Low foam formation
• Completely water-soluble
• Residue-free cleaning
• Removes calcium deposits
• VOC: × < 3.0 %
• AOX-free
• Water hazard class 1

CITOCLYN UV is a cleaning agent for removing UV flexographic printing inks, dispersion inks and 2C varnishes from anilox rollers and printing plates.

• It is used pure and is suitable not only for manual cleaning but also for automatic washing systems. For manual cleaning, it can be applied on the printing plate or anilox roller using cloths or a spray can.
• For manual cleaning, depending on the degree of soiling, leave to act for several minutes and then wipe off with a lint-free cloth.
• Maximum temperature for automatic washing system 40° C

• pH neutral (pH 6 – 7)
• High cleaning effect
• Printing plate-friendly
• Residue-free cleaning
• Flashpoint 100 – 110° C
• VOC-free
• AOX-free
• Water hazard class 1