RSP Processing Rules

RSP Processing Rules

RSP processing rules for creasing, die cutting, kiss cutting and perforating. These are adjusted for height and specially aligned for use with RSP.

descriptioncut : pitchcontentsunitorder no.
perforating rule 8 tpi 2.4 : 0.8 6 m 1 reel BRF00001
perforating rule 12 tpi 1.4 : 0.8 6 m 1 reel BRF00002
perforating rule 16 tpi 0.8 : 0.8 6 m 1 reel BRF00003
perforating rule 35 tpi 0.3 : 0.4 6 m 1 reel BRF00004
perforating rule 50 tpi 0.2 : 0.3 6 m 1 reel BRF00005

tpi = teeth per inch

descriptionapplicationcontentsunitorder no.
cutting rule only cutting 6 m 1 reel BRF00008
creasing rule / R1 only creasing 6 m 1 reel BRF00006
creasing rule / R2 for combined forms 6 m 1 reel BRF00007

Recommendation for Selection of RSP Perforating Rules

Material to be inprintedUseDirectionRules
Up to100 g/qm coated

e.g. forms, fax orders, order forms

 vertical and horizontal to perforation 16 tpi, 35 tpi, 50 tpi

Up to200 g/qm coated and uncoated

 Postcards vertical and horizontal to perforation 12 tpi, 16 tpi
Flyers vertical and horizontal to perforation 12 tpi
Calendars vertical to perforation 12 tpi, (8 tpi)
horizontal to perforation 8 tpi

150 g/qm – 400 g/qm coated glossy or non glossy

 Envelopes vertical and horizontal to perforation 12 tpi, 16 tpi
Cards vertical and horizontal to perforation 8 tpi, 12 tpi

Envelopes with flaps;

perforation of the flap in the fold

 vertical to fold 35 tpi
horizontal to fold 12 tpi
Cellophaned envelopes vertical and horizontal to perforation 8 tpi, 12 tpi


Note:
The values mentioned above are a rough guide for standard materials and are not binding.
The following items have an imporant infl uence on the correct perfo rule:

  • weight of the material to be printed
  • direction
  • coated paper
  • uncoated paper
  • form of perforation

For special requirements a test perforation with all variations should be made on a print sheet with the respective material to be printed.

RSP Processing Rules

Here you can tell us your opinion about our website, our products or our company.
All your comments and suggestions are welcome.