Creasing, cutting, kiss cutting and perforating – all without the need for an extra machine or additional personnel and without requiring time-consuming processing. Experienced application engineers will give rapid, practical and hands-on training in the use of RSP System 2.0.
RSP System 2.0 can be used for a wide variety of applications including folders and perforations, kiss cutting and challenging creasing tasks.
RSP System 2.0 is the economical and fast alternative to the classic converting of your products and offers you the following advantages in addition:
- Reusable and archivable grid sheet
- Reusable and archivable RSP direct fit flexible die
- High quality due to the possibility of register adjustment
- Fast change in the machine in case of successional printing jobs
The following improvements were implemented in the RSP System 2.0 with the patented new hinge:
- Reduction in the number of expendable parts
- Optimized makeready time of inline finishing jobs in the printing press
- As the grid sheet the RSP direct fit flexible dies can also be mounted right on the base plate 2.0
Available for the sheetfed offset presses of the following machine producers:
- HEIDELBERG
- KOMORI
- manroland
- Koenig & Bauer
Online checklist for ordering PDF checklist
Details
| basic system |
|---|
| 1 RSP base plate 2.0 |
| 1 RSP grid sheet |
| 4 RSP protective impression cylinder jackets* |
| 2 RSP protective impression cylinder jacket strips |
| 1 pair safety gloves |
| 1 torque screwdriver Tx20 1.2 Nm |
| 1 side cutter |
| 1 pack supporting foam |
| 1 pack RSP perforating rules 16 tpi |
| 1 roll adhesive tape |
| 2 reels self-adhesive makeready CITO TAPE |
| 1 operating manual, booklet |
| 1 system case |
| 1 RSP protective impression cylinder jacket lifter |
| 1 RSP safety sign |
| 1 sample RSP flexible die |
| 1 sample RSP direct fit flexible die |
| 1 RSP hinge unlocking tool |
| 1 RSP torque wrench incl. extension 250 mm & 17 mm socket |
Accessories can vary with some systems
* from size 70/100: 4 half-format plus 2 full-format RSP protective impression cylinder jackets
RSP System 2.0 HEIDELBERG
| * RSP System 2.0 available for DryStarCoating ** Special solution for this coating unit | ||
| Printing machines | Printing unit | Coating unit |
|---|---|---|
| HEIDELBERG GTO 46 | x | |
| HEIDELBERG GTO 52 | x | |
| HEIDELBERG SM 52 / SX 52 | x | x* / x** |
| HEIDELBERG MO | x | |
| HEIDELBERG SO 74 / SM 72 / SORM | x | |
| HEIDELBERG SM 74 / SX 74 | x | x |
| HEIDELBERG CD 74 / XL 75 / CX 75 | x | x** |
| HEIDELBERG SM 102 / SX 102 | x | x |
| HEIDELBERG CD 102 / CX 102 | x | x |
| HEIDELBERG XL 105 / XL 106 | x | x** |
| HEIDELBERG XL 106 Primefire AutoPlate Coating | x | |
RSP System 2.0 KOMORI
| Printing machines | Printing unit | Coating unit |
|---|---|---|
| KOMORI Lithrone G40 | x | |
| KOMORI Lithrone S40 | x | |
| KOMORI Lithrone 40 | x |
RSP System 2.0 Koenig & Bauer
| Printing machines | Printing unit | Coating unit |
|---|---|---|
| Koenig & Bauer Rapida 105, 730 mm printing length | x | x |
| Koenig & Bauer Rapida 106, 730 mm printing length | x | x |
RSP System 2.0 manroland
| Printing machines | Printing unit | Coating unit |
|---|---|---|
| manroland 500 | x | |
| manroland 700 | x |
Further machine types available on demand.
Our RSP 2.0 systems were developed for the respective manufacturers' standard machines. We would be happy to check if it is possible to offer you a custom-format solution for your machine.
Technical Infos
The grid sheet to be used with the RSP System is fixed to the base plate on the printing press. Previously, a three-part system was used on the front and rear edge of the base plate.
That system has now been replaced by a two-part locking hinge. The bolts needed for fastening the yellow locking bar are no longer required at all, as the new system operates by means of a hinge developed by us specifically for this purpose.
The previous black bolts on the base plate have been replaced by locking hooks, the previous grid sheet bar fastening has been replaced by a newly-designed flat head bolt, and the fixing bar segment has been replaced by the hinge counterpart.
This enables better utilisation of the limited space available on the printing press and reduces the height of the base plate by 30 % in this area, providing significant handling improvement and therefore better ease of use.
The major innovation is the facility to also fix a flexible die directly onto the locking hinge, in addition to the RSP grid sheet.
The RSP direct fit flexible die guarantees best reproducibility of shapes with a maximum level of accuracy.
NOTE
RSP with sheetfed offset printing machines with perfector
It is not possible to use RSP in factories equipped with machines using a Teflon or silicone coating on the impression cylinder. In case of replacement by the respective uncoated alternative of the machine manufacturer use is possible.
RSP with HEIDELBERG sheetfed offset printing machines with perfector
HEIDELBERG PerfectJackets
Use of our RSP on machines equipped with HEIDELBERG PerfectJackets on the impression cylinder is not possible as our protective impression cylinder jackets do not stick on that surface.
HEIDELBERG Mark3 jackets
But RSP can be used if the Perfect Jackets are replaced by HEIDELBERG Mark 3 jackets. These HEIDELBERG Mark 3 jackets are available for all presses with perfecting unit.
RSP with manroland sheetfed offset printing machines with perfector
On machines equipped with OptiPrint Jackets on the impression cylinder use of RSP in the units equipped with these jackets is not possible as our protective impression cylinder jackets do not stick on that surface.
RSP with Koenig & Bauer sheetfed offset printing machines with perfector
Protective impression cylinder jackets with special adhesive tape for silicone jackets are to be used
for machines with silicone jackets on the impression cylinder.
Customer Testimonials
RSP System 2.0 – Getting the most out of our Koenig & Bauer Rapida 106!
Company: WEISS-Druck GmbH & Co. KG
Created by: Guido Jansen, Printing Department Manager,
When we heard that the RSP System 2.0 was now available for the coater of the Koenig & Bauer Rapida 106, we ordered the system immediately.
Having the RSP System 2.0 in the coater has made us much quicker and more flexible. It allows us to easily switch between a coating and perforating job. We were able to convert the coater in just a few steps.
In addition to flexibility and speed, the top quality of perforation, it provides at such a high volume and machine speed, also impressed us. RSP helps us to produce absolutely economically. That means we can offer our customers optimal service: excellent quality, and the shortest possible delivery times.
Koenig & Bauer Rapida 106 | RSP Inline Finishing Products for printing machines Koenig & Bauer
Company: pacemdruck oHG
Issued by: Michael Meistrik, Managing Director
Customer Testimonial: RSP System 2.0 on an SM 52
Company: BasseDruck
Issued by: Dorothee Nienhaus (Dipl. Ing. (BSc) Printing Technology)
Customer Testimonial: RSP System 2.0 on an SM 102
